Deck stain colors: visual chart & brand comparison

These are the exterior deck stain colors from seven brands, each checked against the manufacturer's own color chart: Behr, Sherwin-Williams SuperDeck, Cabot, Ready Seal, Olympic, Thompson's WaterSeal and TWP. They are grouped by opacity, because how much of the wood shows through matters more than the exact shade.

Interior stains such as Minwax Wood Finish are not made for sun and rain, so do not use them outdoors.

89 colors listed. Tap one for the species notes and the closest match in other brands.

Transparent deck stains and oils (14)

The least pigment: they tint and protect the wood rather than color it. Best on new cedar, redwood and hardwoods that are still in good shape. Expect to recoat more often.

Semi-transparent deck stain colors (60)

The most popular choice. The grain shows, the color reads as a tint, and a worn deck is easy to refresh with another coat. Best on new or lightly weathered boards.

Solid deck stain colors (15)

Opaque, close to a thin paint. They hide gray weathering, mismatched boards and old finish, and last longer on fences and siding than on a deck floor.

Color chart at a glance

ColorCodeDepthUndertone
Behr Aged Grey ST-259 Medium warm brown-gray
Cabot Amberwood - Medium light amber
Behr Antique Oak T-171 Medium-dark warm mid brown tint
Sherwin-Williams Bamboo SW 3565 Medium light tan-gold
Sherwin-Williams Banyan Brown SW 3522 Medium golden brown
Cabot Bark Mulch - Medium warm mid brown
Behr Barn Red T-112 Medium-dark rust red tint
Olympic Black Oak ST-2001 Dark dark olive brown
Olympic Black Walnut ST-2002 Medium-dark dark warm brown
Olympic Brick Red ST-2003 Medium-dark rust red-brown
Sherwin-Williams Buckthorn SW 3003 Medium warm medium tan-brown
Cabot Burnt Hickory - Medium-dark dark olive-brown
Ready Seal Burnt Hickory - Dark near-black brown
Behr California Rustic SC-130 Medium-dark dark rust red
Behr Cape Cod Gray SC-365 Light light cool gray
Olympic Cape Cod Gray ST-2004 Medium tan-gray
Behr Cappuccino ST-142 Medium-dark rusty red-brown
Behr Cedar ST-146 Medium medium golden-brown
Sherwin-Williams Cedar SW 3561 Medium light golden amber
Behr Cedar Naturaltone ST-533 Medium warm orange-brown, the fresh-cedar look
Behr Cedar Naturaltone SC-533 Medium orange-brown cedar tone
Behr Cedar Naturaltone - Medium-dark deep orange-brown tint
Olympic Cedar Naturaltone ST-2005 Medium orange-brown
TWP Cedartone 101 Medium golden cedar
Sherwin-Williams Charwood SW 3542 Dark charcoal brown
Cabot Chestnut Brown - Medium mid golden brown
Olympic Chestnut Brown ST-2006 Dark dark chestnut
Thompson's WaterSeal Chestnut Brown - Medium-dark mid brown
Sherwin-Williams Cheyenne Red SW 3043 Medium-dark saturated brick-red
Behr Chocolate ST-129 Dark medium-dark chocolate brown
Behr Chocolate SC-129 Dark chocolate brown
Behr Chocolate T-129 Medium-dark medium brown tint
Thompson's WaterSeal Coastal Gray - Light light warm gray
Behr Coffee ST-103 Dark dark espresso brown
Olympic Coffee ST-2008 Medium-dark mid-dark brown
Behr Cordovan Brown ST-104 Dark near-black brown with a slight red
Behr Cordovan Brown SC-104 Dark near-black brown
Behr Cordovan Brown T-104 Dark dark reddish-brown tint
Cabot Cordovan Leather - Medium-dark dark leather brown
TWP Dark Oak 103 Medium-dark dark golden brown
Ready Seal Dark Walnut - Dark dark brown
Thompson's WaterSeal Desert Tan - Medium golden tan
Sherwin-Williams Douglas Fir SW 3566 Medium warm mid brown
Cabot Driftwood Gray - Medium warm greige
Sherwin-Williams English Walnut SW 3574 Medium-dark medium-dark brown
Behr Golden Honey T-170 Medium honey gold tint
Thompson's WaterSeal Harvest Gold - Light light honey gold
Cabot Honey Teak - Medium honey-orange
TWP Honeytone 115 Medium honey gold
Cabot Jarrah Brown - Medium-dark deep red-brown
Ready Seal Mahogany - Dark dark burgundy-red
Cabot Mahogany Flame - Medium red-orange mahogany
Cabot Mission Brown - Medium-dark reddish mid brown
Ready Seal Mission Brown - Dark dark olive-brown
Behr Natural - Medium amber orange, mostly the wood's own color
Cabot Natural - Medium golden amber
Ready Seal Natural - Medium golden tan (sold earlier as Light Oak)
Ready Seal Natural Cedar - Medium bright orange cedar
Thompson's WaterSeal Natural Cedar - Medium orange cedar
Behr Natural Sequoia T-172 Medium-dark red-orange tint
Cabot New Cedar - Medium light orange-tan
Cabot New Redwood - Medium warm tan-red
Cabot Oak Brown - Medium mid brown
Behr Padre Brown ST-105 Dark very dark brown
Ready Seal Pecan - Dark warm mid brown
TWP Pecan 120 Medium amber brown
Cabot Red Cedar - Medium muted pinkish tan
Behr Redwood ST-330 Medium-dark deep brick red
Behr Redwood SC-330 Medium-dark deep brick red
Behr Redwood - Dark dark red-brown tint
Sherwin-Williams Redwood SW 3501 Medium-dark brick red
Cabot Redwood - Medium orange-red tan
Ready Seal Redwood - Medium-dark deep red
TWP Redwood 102 Medium-dark red-brown
Behr Redwood Naturaltone ST-122 Medium-dark warm reddish-brown with an orange cast
Sherwin-Williams Riverwood SW 3507 Medium-dark red-brown
Behr Russet ST-117 Dark dark red-brown
Behr Russet SC-117 Dark dark red-brown
TWP Rustic 116 Medium-dark rust brown
Sherwin-Williams Salem Red SW 3018 Dark deep barn-red
Thompson's WaterSeal Sedona Red - Medium terracotta red
Sherwin-Williams Shagbark SW 3001 Medium-dark warm bark-brown
Behr Slate ST-102 Dark charcoal black
Behr Slate SC-102 Dark charcoal black
Sherwin-Williams Tavern Oak SW 3573 Medium orange-brown
Sherwin-Williams Traditional Mahogany SW 3080 Dark deep warm mahogany-red
Sherwin-Williams Weathered Gray SW 3568 Light light warm gray
Sherwin-Williams Woodbriar SW 3035 Dark deep warm brown
Sherwin-Williams Yosemite Gold SW 3048 Medium warm golden tan

The products compared

ProductBaseCoatsCoverageDryingLifespan
Behr Premium Semi-Transparent Waterproofing Stain & Sealer 100% acrylic, soap and water clean-up2 thin coats250-300 sq ft/gal first coat, 500-600 second1-2 hours to recoat, 72 hours to full cure; no rain for 24 hoursWarranty 6 years on decks, 8 on fences and siding
Cabot Australian Timber Oil Oil-based (three-oil formula), mineral spirits clean-up1 coat250-600 sq ft/gal24-48 hours-
Behr Premium Transparent Waterproofing Wood Finish 100% acrylic2 thin coats300-350 sq ft/gal first coat, 600-700 second1-2 hours to recoat, 72 hours to full cureUp to 4 years on decks, 6 on fences and siding
Sherwin-Williams SuperDeck Waterborne Semi-Transparent Stain Waterborne2 coats, the second within 7 days100-350 sq ft/galDry to touch in 1 hour, recoat after 4 hours (77°F, 50% humidity)3-year limited warranty on decks
Cabot Semi-Transparent Deck & Siding Stain + Sealer Oil-based, mineral spirits clean-up1 coat only200-650 sq ft/gal24-48 hours dry, 24 hours to recoat-
Olympic Maximum Semi-Transparent Core-shell hybrid resin-250-350 sq ft/galDry in 24 hours (50-85°F); rain-ready in 4 hours-
Ready Seal Exterior Stain and Sealer Oil-based, under 250 g/L VOC2 light coats--1-3 years on decks, 3-5 on vertical surfaces
Behr Premium Solid Color Waterproofing Stain & Sealer 100% acrylic2 thin coats recommended200-400 sq ft/gal first coat, 400-800 second1-2 hours to recoat, 72 hours to full cureWarranty 10 years on decks, 25 on fences and siding
TWP 100 Pro Series Oil-based2 coats, wet on wet100-200 sq ft/gal4-24 hours; apply at 45-95°F-
Thompson's WaterSeal Semi-Transparent Wood Sealer Soap and water clean-up1 coat150-400 sq ft/galDry to touch in 2 hours; above 50°F for 48 hours and no rain for 24Guaranteed 5 years on decks, 7 on fences and siding

Figures are from each manufacturer's product page. Coverage depends on how porous the wood is, so rough or weathered boards take the low end of each range.

Transparent, semi-transparent or solid: how to pick

Start with the condition of the wood, not the color. If the boards are fairly new, the same age and free of old finish, a semi-transparent stain will look the most like wood: the grain shows and the color reads as a tint. On new cedar, redwood or an ipe deck that you want to keep looking natural, a transparent finish such as Cabot Australian Timber Oil or Behr Premium Transparent goes further in that direction. If the deck has mixed old and new boards, gray weathering you cannot clean off, or traces of an earlier solid stain, a solid color is the honest choice, because it evens everything out.

The trade-off is maintenance. The less pigment a stain carries, the faster the sun breaks it down, so transparent finishes need the most frequent recoats and solids the fewest. Solid stains wear in traffic lanes on a deck floor and can peel if the prep was poor, and once a deck is solid stained, going back to a see-through look means stripping it. Going the other way, from semi-transparent to solid, only needs a clean deck.

Common deck colors, by the look you want

A cedar look on pressure-treated pine is the most common goal, and every brand makes a version: Ready Seal Natural Cedar is the bright orange one, TWP Cedartone and Behr Cedar Naturaltone are a little browner, and Cabot New Cedar and Sherwin-Williams SuperDeck Cedar are the lightest. For a classic brown deck, Cabot Bark Mulch, Sherwin-Williams Douglas Fir and Thompson's Chestnut Brown sit in the middle, with Sherwin-Williams English Walnut, Olympic Black Walnut and Ready Seal Dark Walnut deeper.

Reds run from the orange-red redwoods (Cabot Redwood, TWP Redwood) to brick and barn reds (Behr Redwood, Olympic Brick Red, Ready Seal Redwood and Mahogany). Grays are the modern choice: Sherwin-Williams Weathered Gray, Cabot Driftwood Gray, Thompson's Coastal Gray and Behr Aged Grey are warm, light grays, while Behr Slate and Ready Seal Burnt Hickory go nearly black. The same name can mean very different colors across brands: Mission Brown is a reddish mid brown from Cabot and a near-black olive brown from Ready Seal, so pick by the swatch, not the name.

How the wood changes the color

Every transparent and semi-transparent color on this page looks different on different wood. New pressure-treated pine carries a green-yellow cast that shows through, so colors look lighter and more golden than the swatch for the first season. Cedar adds a warm reddish tan and redwood a strong red, so the same can reads deeper on both. Gray weathering shows through anything translucent and muddies the color, which is why a cleaner or brightener comes before the stain on an older deck.

Solid colors behave like paint chips: what you see is close to what you get, whatever the wood underneath. The exception is tannin bleed on cedar and redwood, which can show through light solid colors as tan or brown blotches; a darker color or a stain-blocking primer avoids it.

Heat, dirt and the color you live with

Dark deck stains look rich and hide dirt, but a dark deck in full sun gets hot enough to be uncomfortable barefoot. Mid browns such as Bark Mulch, Douglas Fir or Chestnut Brown are the usual compromise. Very light colors stay cool and brighten a shaded yard, but they show tannin bleed, mildew and pollen faster.

Match the deck to the fixed parts of the house rather than the furniture. A warm red-brown sits well next to brick and cream siding; grays and deep browns suit cooler gray or white houses. Stain a single board, let it dry for a day and look at it in morning and evening light before committing to the whole deck.

New lumber and prep

New pressure-treated lumber is often too wet to take stain when it is installed. Sprinkle water on a board: if it beads, wait and test again in a few weeks; if it soaks in within a few minutes, the wood is ready. Ready Seal, for example, asks for at least a month on pressure-treated wood and wood moisture at 12 percent or less; Thompson's asks for 30 days.

On older decks, clean with a deck cleaner, rinse, and let the boards dry for a couple of days before staining. Stain in the shade or on an overcast day, keep a wet edge along the full length of each board, and do not stain when rain is expected within the dry time on the can. The product table above gives each brand's coats, coverage and drying times.

Frequently Asked Questions

What is the most popular deck stain color?

Natural cedar tones and medium warm browns are the most popular deck stain colors in the US. Shades such as Ready Seal Natural Cedar, TWP Cedartone, and Behr Cedar Naturaltone are top choices for pressure-treated pine, while darker browns like Ready Seal Dark Walnut and Cabot Bark Mulch offer a richer, modern look.

What deck stain color looks best on pressure-treated wood?

Fresh pressure-treated wood typically carries a pale green-yellow cast from chemical treatment. Warm amber, honey, or medium cedar semi-transparent stains look best because their reddish-gold undertones neutralize the green hue and let the natural grain show through.

Should I choose semi-transparent or solid deck stain?

Choose semi-transparent stain if your deck boards are relatively new, in good condition, and you want the wood grain to show through without peeling. Choose solid stain if the deck is older, has mismatched replacement boards, or has stubborn gray weathering that cannot be removed by cleaning.

How long does deck stain last before needing a recoat?

Transparent oils typically last 1 to 2 years before fading. Semi-transparent stains last 2 to 3 years on horizontal deck boards and 3 to 4 years on vertical railings. Solid acrylic stains last 3 to 5 years, but require stripping if you ever want to return to a translucent natural wood finish.

More stain color guides