Cabot Jarrah Brown review
Compare Jarrah Brown with another stain
Jarrah Brown on pressure-treated pine, cedar, redwood and weathered wood
How a deck stain looks depends as much on the boards as the can: new pressure-treated pine carries a green-yellow cast, cedar and redwood add their own red, and gray weathering shows through anything translucent. The notes below are what to expect from Jarrah Brown on each.
Coats and drying
- Coats: Follow the can: some transparent finishes go on in one coat, others in two thin coats.
- Application: Brush or pad on, work it into the grain and back-brush any puddles; do not let it pool on the surface.
- Drying: Typically a day or more before foot traffic; expect to recoat more often than with a pigmented stain.
General guidance only: the label on your can sets the real times. The color on this page is an on-screen approximation of the published swatch, and screens vary, so confirm on a test board of your own wood.
About Cabot Australian Timber Oil
- Base
- Oil-based (three-oil formula), mineral spirits clean-up
- Coats
- 1 coat
- Coverage
- 250-600 sq ft/gal
- Drying
- 24-48 hours
Made for dense exotic hardwoods such as ipe and mahogany; five colors in all.
From the manufacturer's product page. The label on your can wins if it differs.
deep red-brown.
The deepest Australian Timber Oil, named for the Australian hardwood, for a dark red-brown deck.
Closest match in other brands
Ranked by Delta-E (perceptual color distance) between Jarrah Brown and every stain from other brands on this site: nearest first.