Sherwin-Williams Weathered Gray review (SW 3568)

Weathered Gray Sherwin-Williams · SuperDeck Semi-Transparent SW 3568

Compare Weathered Gray with another stain

Sold at Sherwin-Williams stores, not on Amazon.

Weathered Gray on pressure-treated pine, cedar, redwood and weathered wood

How a deck stain looks depends as much on the boards as the can: new pressure-treated pine carries a green-yellow cast, cedar and redwood add their own red, and gray weathering shows through anything translucent. The notes below are what to expect from Weathered Gray on each.

Pressure-treated pine
New pressure-treated pine has a green or yellow cast, and Weathered Gray is translucent, so that tint shows through: expect it to look lighter and more golden than the swatch for the first season. Let new boards dry until water soaks in before staining.
Cedar
On cedar, Weathered Gray sits over the wood's own reddish-tan tone, so it reads warmer and a little deeper than on pine. New cedar is often smooth and oily; a deck cleaner or brightener first helps the stain soak in evenly.
Redwood
Redwood is the darkest and reddest of the common decking woods, so Weathered Gray looks deepest here, and the lighter colors barely change it. On redwood it enriches the existing color more than it replaces it.
Weathered gray wood
A semi-transparent stain like Weathered Gray does not hide gray weathering: whatever gray is left after cleaning shows through and muddies the color. Clean and brighten old boards first, or switch to a solid color if the gray will not come out.

Coats and drying

General guidance only: the label on your can sets the real times. The color on this page is an on-screen approximation of the published swatch, and screens vary, so confirm on a test board of your own wood.

About Sherwin-Williams SuperDeck Waterborne Semi-Transparent Stain

Base
Waterborne
Coats
2 coats, the second within 7 days
Coverage
100-350 sq ft/gal
Drying
Dry to touch in 1 hour, recoat after 4 hours (77°F, 50% humidity)
Lifespan
3-year limited warranty on decks

Apply at 50-90°F surface temperature; can go on damp wood up to 25% moisture.

From the manufacturer's product page. The label on your can wins if it differs.

light warm gray.

A light warm gray for a driftwood look with UV protection, or to match boards that have already grayed.

Closest match in other brands

Ranked by Delta-E (perceptual color distance) between Weathered Gray and every stain from other brands on this site: nearest first.