Sherwin-Williams stain colors

SuperDeck comes in two opacities here: semi-transparent (SW 35xx codes), where the grain and the wood's own tone show through, and solid, which fully hides the grain and suits older or mismatched boards.

They are exterior stains, not for furniture or cabinets. The colors below carry their published SW codes.

17 colors listed. Tap one for the species notes and the closest match in other brands.

SuperDeck semi-transparent colors (10)

Waterborne; the grain shows through. Best on new or lightly weathered wood.

SuperDeck solid colors (7)

Opaque; hides gray, patched and mismatched boards.

Color chart at a glance

ColorCodeDepthUndertone
Bamboo SW 3565 Medium light tan-gold
Banyan Brown SW 3522 Medium golden brown
Buckthorn SW 3003 Medium warm medium tan-brown
Cedar SW 3561 Medium light golden amber
Charwood SW 3542 Dark charcoal brown
Cheyenne Red SW 3043 Medium-dark saturated brick-red
Douglas Fir SW 3566 Medium warm mid brown
English Walnut SW 3574 Medium-dark medium-dark brown
Redwood SW 3501 Medium-dark brick red
Riverwood SW 3507 Medium-dark red-brown
Salem Red SW 3018 Dark deep barn-red
Shagbark SW 3001 Medium-dark warm bark-brown
Tavern Oak SW 3573 Medium orange-brown
Traditional Mahogany SW 3080 Dark deep warm mahogany-red
Weathered Gray SW 3568 Light light warm gray
Woodbriar SW 3035 Dark deep warm brown
Yosemite Gold SW 3048 Medium warm golden tan

About Sherwin-Williams SuperDeck Waterborne Semi-Transparent Stain

ProductBaseCoatsCoverageDryingLifespan
Sherwin-Williams SuperDeck Waterborne Semi-Transparent Stain Waterborne2 coats, the second within 7 days100-350 sq ft/galDry to touch in 1 hour, recoat after 4 hours (77°F, 50% humidity)3-year limited warranty on decks

Figures are from each manufacturer's product page. Coverage depends on how porous the wood is, so rough or weathered boards take the low end of each range.

What a solid stain actually is

A solid color stain sits between a semi-transparent stain and an exterior paint. It carries enough pigment to hide the grain and the color of the wood underneath, but it is thinner than paint, so the texture of the boards still shows through. That is why a solid-stained deck still reads as wood from a few feet away even though you cannot see the grain lines.

The practical result is forgiveness. Boards that have weathered unevenly, replacement boards next to old ones, or wood that still carries patches of a previous stain all end up one color. A semi-transparent stain cannot do that, because it shows whatever is already in the wood.

Choosing a color from the chart

The SuperDeck colors listed here fall into three families. Shagbark, Woodbriar and Buckthorn are the browns, from a warm mid-tan to a deep chocolate. Traditional Mahogany, Cheyenne Red and Salem Red are the reds, from a brick tone to a deep barn red. Yosemite Gold is the light golden tan for anyone who wants the look of fresh cedar without its patchiness.

Darker colors hide dirt and wear better on a deck floor, but they also absorb more sun and get noticeably hotter underfoot in summer. Lighter colors stay cooler and make a small deck look larger, at the cost of showing scuffs and pollen sooner. On fences and siding, where nobody walks, the choice is purely about how the color sits against the house.

Use the SW code, not the name, when you order. Sherwin-Williams stores mix solid stains to order, and the code is what the counter staff type in. The swatch colors on this page are on-screen approximations, so always look at a physical chip in daylight, ideally against your house trim.

Prep and recoating

A solid stain bonds to the surface rather than soaking deep into it, so prep decides how long it lasts. Clean the wood, let it dry fully, scrape anything loose and lightly sand rough spots. Applying over a dirty or damp deck is the most common reason a solid stain peels.

Once a deck is solid stained, you cannot go back to a semi-transparent look without stripping it, because the pigment layer hides the grain for good. Going the other way is easy: a solid stain covers an old semi-transparent finish. Walking surfaces wear faster than railings and fences, so expect to touch up the floor more often than the verticals, and follow the recoat interval on the can.

More stain color guides