Sherwin-Williams Banyan Brown review (SW 3522)
Compare Banyan Brown with another stain
Sold at Sherwin-Williams stores, not on Amazon.
Banyan Brown on pressure-treated pine, cedar, redwood and weathered wood
How a deck stain looks depends as much on the boards as the can: new pressure-treated pine carries a green-yellow cast, cedar and redwood add their own red, and gray weathering shows through anything translucent. The notes below are what to expect from Banyan Brown on each.
Coats and drying
- Coats: Typically one coat, since a second can look blotchy on new lumber.
- Application: Brush on and keep a wet edge, no wiping off.
- Drying: Typically a day or more before foot traffic; follow the can for temperature limits.
General guidance only: the label on your can sets the real times. The color on this page is an on-screen approximation of the published swatch, and screens vary, so confirm on a test board of your own wood.
About Sherwin-Williams SuperDeck Waterborne Semi-Transparent Stain
- Base
- Waterborne
- Coats
- 2 coats, the second within 7 days
- Coverage
- 100-350 sq ft/gal
- Drying
- Dry to touch in 1 hour, recoat after 4 hours (77°F, 50% humidity)
- Lifespan
- 3-year limited warranty on decks
Apply at 50-90°F surface temperature; can go on damp wood up to 25% moisture.
From the manufacturer's product page. The label on your can wins if it differs.
golden brown.
A golden-brown semi-transparent stain that warms new lumber without leaning red.
Closest match in other brands
Ranked by Delta-E (perceptual color distance) between Banyan Brown and every stain from other brands on this site: nearest first.