Behr stain colors

Behr Premium exterior stains come in three opacities: transparent (the wood's own color with a tint), semi-transparent (ST codes, the grain still shows) and solid color (SC codes, the grain is covered). Codes and colors here are checked against Behr's own color selector.

Several colors exist in more than one opacity, such as Cedar Naturaltone, Redwood, Russet, Chocolate and Cordovan Brown. The solid version always looks deeper and more even than the semi-transparent one on the same boards.

29 colors listed. Tap one for the species notes and the closest match in other brands.

Behr Premium Transparent (9)

Tints that protect the wood with the grain fully visible.

Behr Premium Semi-Transparent (12)

ST codes. The most common Behr deck stain.

Behr Premium Solid Color (8)

SC codes. Covers the grain, gray and mismatched boards.

Color chart at a glance

ColorCodeDepthUndertone
Aged Grey ST-259 Medium warm brown-gray
Antique Oak T-171 Medium-dark warm mid brown tint
Barn Red T-112 Medium-dark rust red tint
California Rustic SC-130 Medium-dark dark rust red
Cape Cod Gray SC-365 Light light cool gray
Cappuccino ST-142 Medium-dark rusty red-brown
Cedar ST-146 Medium medium golden-brown
Cedar Naturaltone ST-533 Medium warm orange-brown, the fresh-cedar look
Cedar Naturaltone SC-533 Medium orange-brown cedar tone
Cedar Naturaltone - Medium-dark deep orange-brown tint
Chocolate ST-129 Dark medium-dark chocolate brown
Chocolate SC-129 Dark chocolate brown
Chocolate T-129 Medium-dark medium brown tint
Coffee ST-103 Dark dark espresso brown
Cordovan Brown ST-104 Dark near-black brown with a slight red
Cordovan Brown SC-104 Dark near-black brown
Cordovan Brown T-104 Dark dark reddish-brown tint
Golden Honey T-170 Medium honey gold tint
Natural - Medium amber orange, mostly the wood's own color
Natural Sequoia T-172 Medium-dark red-orange tint
Padre Brown ST-105 Dark very dark brown
Redwood ST-330 Medium-dark deep brick red
Redwood SC-330 Medium-dark deep brick red
Redwood - Dark dark red-brown tint
Redwood Naturaltone ST-122 Medium-dark warm reddish-brown with an orange cast
Russet ST-117 Dark dark red-brown
Russet SC-117 Dark dark red-brown
Slate ST-102 Dark charcoal black
Slate SC-102 Dark charcoal black

The products compared

ProductBaseCoatsCoverageDryingLifespan
Behr Premium Semi-Transparent Waterproofing Stain & Sealer 100% acrylic, soap and water clean-up2 thin coats250-300 sq ft/gal first coat, 500-600 second1-2 hours to recoat, 72 hours to full cure; no rain for 24 hoursWarranty 6 years on decks, 8 on fences and siding
Behr Premium Transparent Waterproofing Wood Finish 100% acrylic2 thin coats300-350 sq ft/gal first coat, 600-700 second1-2 hours to recoat, 72 hours to full cureUp to 4 years on decks, 6 on fences and siding
Behr Premium Solid Color Waterproofing Stain & Sealer 100% acrylic2 thin coats recommended200-400 sq ft/gal first coat, 400-800 second1-2 hours to recoat, 72 hours to full cureWarranty 10 years on decks, 25 on fences and siding

Figures are from each manufacturer's product page. Coverage depends on how porous the wood is, so rough or weathered boards take the low end of each range.

Frequently Asked Questions

What is the difference between Behr ST and SC stain codes?

Behr ST codes designate Semi-Transparent exterior stains that allow wood grain and natural character to show through. SC codes designate Solid Color stains, which form an opaque protective barrier that completely hides graying and mismatched boards.

How many coats of Behr deck stain should you apply?

Apply two thin, even coats of Behr semi-transparent or solid stain. Applying more than two coats creates an excessively thick surface film that resists proper breathability and increases the likelihood of peeling.

How long must Behr deck stain dry before rain exposure?

Behr exterior stains require at least 24 to 48 hours of dry weather above 50°F before exposure to rainfall or foot traffic. Wet weather within the initial 24 hours can wash out uncured resins or cause surface hazing.

More stain color guides