Behr Cedar Naturaltone review (SC-533)
Compare Cedar Naturaltone with another stain
Sold at The Home Depot, not on Amazon.
Cedar Naturaltone on pressure-treated pine, cedar, redwood and weathered wood
How a deck stain looks depends as much on the boards as the can: new pressure-treated pine carries a green-yellow cast, cedar and redwood add their own red, and gray weathering shows through anything translucent. The notes below are what to expect from Cedar Naturaltone on each.
Coats and drying
- Coats: Typically two coats on bare wood.
- Application: Brush or roll on and back-brush, no wiping off, since it is meant to hide the grain.
- Drying: Typically a day or more before foot traffic; follow the can for temperature limits.
General guidance only: the label on your can sets the real times. The color on this page is an on-screen approximation of the published swatch, and screens vary, so confirm on a test board of your own wood.
About Behr Premium Solid Color Waterproofing Stain & Sealer
- Base
- 100% acrylic
- Coats
- 2 thin coats recommended
- Coverage
- 200-400 sq ft/gal first coat, 400-800 second
- Drying
- 1-2 hours to recoat, 72 hours to full cure
- Lifespan
- Warranty 10 years on decks, 25 on fences and siding
From the manufacturer's product page. The label on your can wins if it differs.
orange-brown cedar tone.
A solid cedar tone for weathered decks that need even color but should still read as cedar rather than painted.
Closest match in other brands
Ranked by Delta-E (perceptual color distance) between Cedar Naturaltone and every stain from other brands on this site: nearest first.