Behr Redwood review (SC-330)
Compare Redwood with another stain
Sold at The Home Depot, not on Amazon.
Redwood on pressure-treated pine, cedar, redwood and weathered wood
How a deck stain looks depends as much on the boards as the can: new pressure-treated pine carries a green-yellow cast, cedar and redwood add their own red, and gray weathering shows through anything translucent. The notes below are what to expect from Redwood on each.
Coats and drying
- Coats: Typically two coats on bare wood.
- Application: Brush or roll on and back-brush, no wiping off, since it is meant to hide the grain.
- Drying: Typically a day or more before foot traffic; follow the can for temperature limits.
General guidance only: the label on your can sets the real times. The color on this page is an on-screen approximation of the published swatch, and screens vary, so confirm on a test board of your own wood.
About Behr Premium Solid Color Waterproofing Stain & Sealer
- Base
- 100% acrylic
- Coats
- 2 thin coats recommended
- Coverage
- 200-400 sq ft/gal first coat, 400-800 second
- Drying
- 1-2 hours to recoat, 72 hours to full cure
- Lifespan
- Warranty 10 years on decks, 25 on fences and siding
From the manufacturer's product page. The label on your can wins if it differs.
deep brick red.
A solid brick-red that gives an older deck a uniform redwood look once the grain and gray are covered.
Closest match in other brands
Ranked by Delta-E (perceptual color distance) between Redwood and every stain from other brands on this site: nearest first.