TWP Dark Oak review (103)
Compare Dark Oak with another stain
Dark Oak on pressure-treated pine, cedar, redwood and weathered wood
How a deck stain looks depends as much on the boards as the can: new pressure-treated pine carries a green-yellow cast, cedar and redwood add their own red, and gray weathering shows through anything translucent. The notes below are what to expect from Dark Oak on each.
Coats and drying
- Coats: Typically one coat, since a second can look blotchy on new lumber.
- Application: Brush on and keep a wet edge, no wiping off.
- Drying: Typically a day or more before foot traffic; follow the can for temperature limits.
General guidance only: the label on your can sets the real times. The color on this page is an on-screen approximation of the published swatch, and screens vary, so confirm on a test board of your own wood.
About TWP 100 Pro Series
- Base
- Oil-based
- Coats
- 2 coats, wet on wet
- Coverage
- 100-200 sq ft/gal
- Drying
- 4-24 hours; apply at 45-95°F
Not VOC-compliant in every state; check before buying.
From the manufacturer's product page. The label on your can wins if it differs.
dark golden brown.
A dark golden brown for a deeper deck color without red.
Closest match in other brands
Ranked by Delta-E (perceptual color distance) between Dark Oak and every stain from other brands on this site: nearest first.