Cabot New Cedar review
Compare New Cedar with another stain
New Cedar on pressure-treated pine, cedar, redwood and weathered wood
How a deck stain looks depends as much on the boards as the can: new pressure-treated pine carries a green-yellow cast, cedar and redwood add their own red, and gray weathering shows through anything translucent. The notes below are what to expect from New Cedar on each.
Coats and drying
- Coats: Typically one coat, since a second can look blotchy on new lumber.
- Application: Brush on and keep a wet edge, no wiping off.
- Drying: Typically a day or more before foot traffic; follow the can for temperature limits.
General guidance only: the label on your can sets the real times. The color on this page is an on-screen approximation of the published swatch, and screens vary, so confirm on a test board of your own wood.
About Cabot Semi-Transparent Deck & Siding Stain + Sealer
- Base
- Oil-based, mineral spirits clean-up
- Coats
- 1 coat only
- Coverage
- 200-650 sq ft/gal
- Drying
- 24-48 hours dry, 24 hours to recoat
Offered in about 100 colors; the common ones are listed here.
From the manufacturer's product page. The label on your can wins if it differs.
light orange-tan.
Cabot's light, fresh-cut cedar tone for cedar siding and decks that should look newly milled.
Closest match in other brands
Ranked by Delta-E (perceptual color distance) between New Cedar and every stain from other brands on this site: nearest first.