Thompson's WaterSeal Chestnut Brown review
Compare Chestnut Brown with another stain
Chestnut Brown on pressure-treated pine, cedar, redwood and weathered wood
How a deck stain looks depends as much on the boards as the can: new pressure-treated pine carries a green-yellow cast, cedar and redwood add their own red, and gray weathering shows through anything translucent. The notes below are what to expect from Chestnut Brown on each.
Coats and drying
- Coats: Typically one coat, since a second can look blotchy on new lumber.
- Application: Brush on and keep a wet edge, no wiping off.
- Drying: Typically a day or more before foot traffic; follow the can for temperature limits.
General guidance only: the label on your can sets the real times. The color on this page is an on-screen approximation of the published swatch, and screens vary, so confirm on a test board of your own wood.
About Thompson's WaterSeal Semi-Transparent Wood Sealer
- Base
- Soap and water clean-up
- Coats
- 1 coat
- Coverage
- 150-400 sq ft/gal
- Drying
- Dry to touch in 2 hours; above 50°F for 48 hours and no rain for 24
- Lifespan
- Guaranteed 5 years on decks, 7 on fences and siding
Wait 30 days before sealing new pressure-treated wood.
From the manufacturer's product page. The label on your can wins if it differs.
mid brown.
A mid brown, the safe Thompson's choice for hiding pressure-treated green.
Closest match in other brands
Ranked by Delta-E (perceptual color distance) between Chestnut Brown and every stain from other brands on this site: nearest first.