Cabot Amberwood review
Compare Amberwood with another stain
Amberwood on pressure-treated pine, cedar, redwood and weathered wood
How a deck stain looks depends as much on the boards as the can: new pressure-treated pine carries a green-yellow cast, cedar and redwood add their own red, and gray weathering shows through anything translucent. The notes below are what to expect from Amberwood on each.
Coats and drying
- Coats: Follow the can: some transparent finishes go on in one coat, others in two thin coats.
- Application: Brush or pad on, work it into the grain and back-brush any puddles; do not let it pool on the surface.
- Drying: Typically a day or more before foot traffic; expect to recoat more often than with a pigmented stain.
General guidance only: the label on your can sets the real times. The color on this page is an on-screen approximation of the published swatch, and screens vary, so confirm on a test board of your own wood.
About Cabot Australian Timber Oil
- Base
- Oil-based (three-oil formula), mineral spirits clean-up
- Coats
- 1 coat
- Coverage
- 250-600 sq ft/gal
- Drying
- 24-48 hours
Made for dense exotic hardwoods such as ipe and mahogany; five colors in all.
From the manufacturer's product page. The label on your can wins if it differs.
light amber.
A light amber timber oil, close to Natural but warmer, for exotic hardwood decks.
Closest match in other brands
Ranked by Delta-E (perceptual color distance) between Amberwood and every stain from other brands on this site: nearest first.