Teak Oil vs Tung Oil

Teak oil is a thin blended oil for dense, oily woods and outdoor furniture, reapplied a few times a year; pure tung oil is a slower, longer-lasting finish for interior pieces, food surfaces and pale woods. Despite the names, neither contains teak and only one is actually tung.

Teak oil Penetrating oil · Thin oil and resin blend with UV inhibitors

Pick teak oil for outdoor teak, mahogany and ipe furniture, boat trim and other dense tropical woods, where you want a quick golden refresh and accept re-oiling every three to six months.

Tung oil Penetrating oil · Pressed tung-tree seed oil

Pick tung oil for indoor furniture, countertops, cutting boards and anything you want to finish once and then only touch up. Expect a week of coats and a month to cure.

Side by side

Teak oilTung oil
Type Penetrating oil Penetrating oil
Base Thin oil and resin blend with UV inhibitors (contains no teak) Pressed tung-tree seed oil, often cut with citrus solvent
Typical products Watco Teak Oil, Star brite Premium Golden Teak Oil, Minwax Teak Oil Hope's 100% Tung Oil, Real Milk Paint Pure Tung Oil, Sutherland Welles
Dry to touch 8 to 10 hours 24 to 72 hours per coat (faster thinned 1:1)
Recoat 15 to 30 minutes wet-on-wet 1 to 3 days
Full cure 72 hours 15 to 30 days
Coats 2 to 3 4 to 7 thin coats
Hardness and scratch resistance ●●○○○ 2/5 ●●○○○ 2/5
Water resistance ●●●○○ 3/5 ●●●○○ 3/5
Color change Moderate warm golden tone Slight warm honey tone that barely changes over time
Sheen options Low satin Matte to low satin
Application Wipe on, wipe off; outdoors re-oil every 3 to 6 months Wipe on, let it soak 20 to 30 minutes, wipe off every bit of excess
Cleanup Mineral spirits Mineral spirits or citrus solvent
Odor and fumes Moderate Mild and nutty
Repairability Re-oil Re-oil the worn spot, no sanding
Food-contact safety Not rated Yes once cured, no metallic driers
Typical price $14 to $22 per quart $30 to $45 per quart

Times are typical data-sheet figures at 70 F and 50% humidity; cold, damp or thick coats stretch every one of them. Scores run 1 (poor) to 5 (best) for ordinary use. Follow the can you bought over anything on this page.

What actually separates them

What they are. Teak oil is a marketing name for a thin oil and varnish blend, often with UV inhibitors and sometimes with tung or linseed oil in it. Pure tung oil is one ingredient, pressed from tung nuts. The teak oil can is formulated to soak into dense woods that shed thicker finishes; the tung oil can works on any wood.

Durability and schedule. Teak oil looks good for a season outdoors and then grays; the routine is clean and re-oil two or three times a year. Tung oil cures into a more water-resistant surface over several coats and, indoors, holds up for years with the odd wipe of fresh oil.

Color and safety. Teak oil usually adds a golden tone and some versions carry a tint. Tung oil adds a light honey warmth and then stays put. Pure tung oil is food-safe once cured; teak oil is not sold for food contact because of the resins and driers.

About teak oil

Teak oil contains no teak. It is a thin oil and resin blend, usually with UV inhibitors, formulated to soak into dense, oily woods like teak, mahogany and ipe that reject thicker finishes. Outdoors it looks good for a season and needs re-oiling two or three times a year. Indoors it behaves like Danish oil. Skip it on pine or oak; a Danish oil does the same job cheaper.

About tung oil

Pure tung oil is pressed from the nut of the tung tree and cures into a soft, matte, water-resistant finish that lives in the wood rather than on it. It takes a week of coats and a month to cure, but it never peels, it does not yellow the way linseed oil does, and a worn spot is fixed with a rag. Watch the label: Minwax and Formby’s “Tung Oil Finish” is a thinned varnish with little or no tung oil in it.

Frequently asked questions

Does teak oil contain tung oil?

Some brands include it; most are linseed or mineral oil blends with resin and solvent. Read the ingredients. None contain teak.

Can I use tung oil on outdoor teak?

Yes, and it lasts about as long as teak oil before it needs refreshing, but it takes days per coat and the dense wood only absorbs a little. Teak oil is formulated to be the lazier option there.

Which is better for a cutting board?

Pure tung oil, cured for about a month. Teak oil is not rated for food contact.

How often do I re-oil outdoor furniture?

With teak oil, every three to six months in sun and rain. Many owners let teak go silver-gray instead and oil it once a year, or never.